"Team" Earring Tutorial

Supplies:  See Pics below supplies.  Most of it is pictured.

1. Scrabble Pieces.  You can purchase at Michaels.

2.  Images of your choice.  I bought mine off of Etsy under scrabble images.

3.  Small Jewelery rings.

4. Earring Hooks.  Again from Michaels.

5.  Paint color of choice

6.  Modge Podge

7.  Dementional Modge Podge

8.  Drill

9.  Also not sure what it is called but used the wire bead filler.  That is the thing in the picture that looks like a needle with the circle at the end.  LOL!  In the jewelery dept. at Joann fabric.

How To Make:

1.  Drill hole in top center of 2 scrabble pieces.

2.  Use your scrabble piece to trace around the image you are using or use the scrabble size image if already sized. (CUT OUT)

3.  Paint your scrabble pieces to match the image you chose.  Front back and sides.

4.  Once paint dry, now Modge Podge your image on the side with the letter of scrabble piece.

5.  Once Modge Podge is dry then you will use your dementional Modge Podge and put a layer on your image.

6.  Once Dementional Modge Podge is completely dry now take a pin and poke from the back to make sure you do not seal the hole.

7.  Now Dementional Modge Podge the backside.  Let Dry Complete.

8.  Now once all dry you can take the thing I call a bead filler and put halfway through hole of scrabble piece and bring both sides up and twist.  Cut accessive wire off, but you will be using the round end to put the ring through which will also have the hood earring.  Or you can just use a ring to up through the scrabble hole.  What ever is easier for you.  Sorry I cannot remember what those are called.  If you are reading this and know, please feel free to comment!  LOL!

And now you are all finished and have some really cute earrings!!!!

Thanks for visiting my blog and hope you enjoyed this tutorial!

 

 



"Mickey Mouse" Tooth Fairy Pocket Pillow Tutorial

 

Tools Need:

1. 2 pieces of fabric of choice approx. 4.5 by 4.5.

2. Black & Red Felt (Not Shown)

3.  2 white buttons

4. Needle & Thread (Not Shown)

5. Ribbon of choice

6. Pillow Stuffing

7.  Hot Glue Gun...(Not Shown)

8.  Sewing Machine (Not Shown)

9. Pen & Cardboard or Paper

How to Make:

1.  First cut 2 pieces of fabric of choice the same size. (Approx. 4.5 X 4.5)

2.  Cut a piece of ribbon of color choice. (Approx. 10 inches)

3.  Take your Pen and a piece of paper/cardboard and make a Mickey shaped head using a glass and 2 milk carten lids for the ears...  Then cut it out so you have a Mickey head Pattern.

4.  Pin your Mickey head Pattern on the black felt and cut around, so you have a full Mickey head in Black felt.

5. Next Pin your Mickey head again on the Read felt and cut around to for the Mickey head.  Now take the Red Mickey and cut in half so you just have half the large circle for his pants.

6.  Now place the red pants on the bottom half of Mickey head made from black felt.  Now take your sewing machine or hand stitch around the bottom of the pants leaving the top of pants to make the pocket.

7.  Now hand sew the 2 white buttons on the red pants.

8.  I also sewed "MY TOOTH" on mickey with my sewing machine.

(Not Necessary)

9.  Now set aside Mickey for now and take your 2 pieces of 4.5 fabric and 10 inch ribbon.  Take one piece of the fabric laying down with design facing up.  Now pin Ribbon as shown below and then lay other piece of fabric over design down as shown.

10.  Now sew around the edges leaving the bottom open for sewing with your machine.

11.  Now once sewn pull inside out and pull your pins out of ribbon.

12.  Now stuff with stuffing leaving a half inch at bottome to sew across.

13.  Take scissors and trim off any accessive fabric.

14.  Now take your glue gun and glue Mickey on the from of pillow.

 

And you have you Awesome cute Mickey Mouse Tooth Fairy Pocket Pillow!

 

Thanks for Stopping at my blog!  Hope you enjoyed & stop back again!!! 

 

 

 



D.I.Y Decorated Team Wine Glass Tutorial!

Tools Needed:

1. Wine Glass or Martini Glass.. You can get nice one's at the Dollar Store.

2.  Sharpie Paint Pens... Your color choice depending on what team you are doing.

3.  Oven

 

How to:

1.  Wash and Clean your glass very good before applying paint.

2.  I covered the bottom of the glass with my White Paint Pen and then used my Red Paint Pen to add the seams like a Baseball.

3.  The Stem you just scribble with the Paint Pen colors because it kind of looks 3D so you really cannot make any mistakes when painting stem...

4.  Next Decide what Team Logo you are going to do.  I practiced with a Pen on paper first before I applied the Paint pen to my glass.  But do not worry, if you do make a error on the glass you can wipe off as soon as possible before drys perminent.

5.  Once complete, I would let glass sit for 24 hours to completely Dry.

6.  Next do not preheat, but just put glass on cookie sheet standing up at 250 degrees for 30 minutes...  Then take out and cool....

7.  Glasses should be hand washed only!!!!!!!!!!!

 

I am making these this year for X-Mas Gifts!!!!  You can obviously put any design your heart desires on them!!!!!  I just have a lot of Wine drinking St. Louis Card Fans!!!  LOL!! 

Thanks for visiting!!!

 



Mickey Mouse Party Bag Favor Tutorial!

THE 5 MIN. T-SHIRT TUTORIAL IS BELOW THIS MICKEY TUTORIAL!

TOOL YOU WILL NEED:

1. I BOUGHT THESE CUTE LITTLE GREY FELT CONTAINERS FROM TARGET IN THE $1 SECTION.  YOU CAN ALSO PROB. FIND AT $1 STORE....

2. BLACK & RED FELT WHICH I GOT AT JOANN FABRIC'S.

3. YELLOW BUTTON AGAIN JOANN FABRIC.

3. A PIECE OF HEAVY PAPER, MAYBE CARDBOARD.

4. BLACK SHARPIE

5.  SEWING MACHINE/ NEEDLE THREAD

6. HOT GLUE GUN

HOW TO MAKE:

1.  I FIRST TOOK MY HEAVY PAPER AND DREW MY OWN MICKEY HEAD DESIGN AND MICKEY GLOVE DESIGN & THEN CUT OUT.

2.  NEXT USE YOUR DESIGN AND PLACE ON FELT AND CUT YOUR MICKEY HEADS AND GLOVES OUT.  AS MANY AS YOU PLAN ON MAKING....FOR THE GLOVE I DID IT IN WHITE AND  USED THE SAME PATTERN AND CUT A LITTLE LARGER GLOVE IN BLACK TO PLACE BEHIND THE WHITE.

3.  NEXT I USED THE MICKEY HEAD ON RED FABRIC TO MAKE THE HALF HEAD FOR THE PANTS.  SO JUST GO HALF AROUND AND CUT STRAIGHT ACROSS.  SEE PICTURE....

4.  NEXT I USED MY SEWN MACHINE TO SEW THE RED PANTS ON THE BLACK MICKEY HEAD.

5.  I THEN HAND SEWN THE YELLOW BUTTONS ON.

6.  FOR THE GLOVE I TOOK MY SEWN MACHINE TO SEW THE NAMES ON THE GLOVES.  I USED A BLACK MARKER TO DRAW THE LINES FOR THE GLOVE.

7.  NEXT I HOT GLUE THE WHITE GLOVE ON TOP OF BLACK GLOVE, THEN I HOT GLUE THE MICKEY ON ONE SIDE OF FELT BASKET AND THE GLOVE ON THE OTHER...

AND FINISHED!

THANKS FOR CHECKING MY BLOG OUT!

My son's homemade Mickey Mouse Cake!